Ventuz Blog

The same solution for RGB/VGA/DVI as shown in my previous post is available from NTI Network Technology Inc.

NTI, DVI Quad Screen Splitter

In combination with the new DELTACAST-DVI input board and Ventuz a very interesting solution to feed in multiple HiRes signals.

By using two of these boxes, the two inputs of the deltacast will provide eight DVI signals in Ventuz – of course only 50% of their original resolution.

If you need to display multiple HD SDI signals in Ventuz, but the full resolution is not required (onair promotion and previews) you could use the DECIMATOR-QUAD from REDBYTE Design. This unit receives 4 SDI signals and combines them into a single output by scaling them down. The resulting SDI output gets captured by the DELTACAST HD boards into Ventuz Professional or Broadcast Edition. The second input of the DELTACAST board could be used to input one out of the four quads in full resolution. In combination with a synchronized 4×1 switcher controlled by Ventuz serial I/O nodes make this a very feasable solution for multiple video inputs.

Btw, these 4 inputs don’t need to be the same format and frequency!

We haven’t tested the box yet, but we would like to know your opinion or test results.

DECIMATOR-QUAD

JUST FIGURED OUT THAT THIS BOX ONLY PROVIDES SD ON OUTPUT – BUT STILL INTERESTING!